Your location:Home  Products   Fiberglass Wallcovering  Fiberglass Wallcovering
Fiberglass Wallcovering
Fiberglass Wallcovering

Fiberglass Wallcovering

Packing:Standard carton: 80*60*102 cm, one carton per pallet.Pallet size: 80*60*12 cm.Alternatively, use standard small cartons. Depending on carton dimensions: 4cartons (or 6 cartons) per pallet.Pallet size: 120*80*12 cm.Roll length: 25/30/50 m; Roll width: 1 m
Introduction

2.jpg

Packing:

Standard carton: 80*60*102 cm, one carton per pallet.

Pallet size: 80*60*12 cm.

Alternatively, use standard small cartons.

Depending on carton dimensions: 4cartons (or 6 cartons) per pallet.

Pallet size: 120*80*12 cm.

Roll length: 25/30/50 m;

Roll width: 1 m.



Usage Method of Special Coatings:

1. Stir the coating thoroughly until evenly mixed,then use it directly.

2. Apply evenly to the wall with a roller; 1 to 2 coats are recommended.

3. Allow an interval of 2 to 4 hours between each coat (subject to surface drying).

4.After painting is completed, wait for more than 24 hours. Do not start wallpaper construction until the wall is fully dry.


3.jpg

Coverage Area = Wall Width × Wall Height

1kg of paint covers approximately 8~10

square meters per coat.



Wallpaper Installation Instructions


1.jpg

Wall Preparation

Ensure the wall surface is smooth, clean, dry, free of oil stains, loose materials and dust. If there are uneven areas or cracks, please repair and sand them first.

2.jpg

Measure & Cut

Measure the height and width of the wall surface, and reserve an allowance of 5-10cm at both the top and bottom. Cut the wall fabric according to the measured dimensions to ensure proper pattern alignment.

3.jpg

Apply Adhesive

Use a roller to apply the mixed adhesive evenly onto the wall surface. Pay special attention to edges and corners to avoid uncoated areas.

4.jpg

Paste Wallpaper

Align the top edge of the wall fabric with the top of the wall and unroll it slowly downwards. Adjust the position while pasting to ensure precise vertical alignment. Use a squeegee to assist in smoothing out the wall fabric.

5.jpg

Press & Smooth

Use a squeegee to scrape and press evenly from the center to the edges, expel air bubbles and excess adhesive, so that the wall fabric fully adheres to the wall surface.

6.jpg

Trim Edges

Use a utility knife to cut the wall fabric along internal and external corners or excess parts, remove redundant edges and corners to ensure neat and beautiful seams.



1.jpg2.jpg3.jpg
H0100Roll length: 25/30/50m; Roll width: 1m
H0122Roll length: 25/30/50m; Roll width: 1mH0104Roll length: 25/30/50m; Roll width: 1m
4.jpg5.jpg6.jpg
H0168Roll length: 25/30/50m; Roll width: 1mH0045Roll length: 25/30/50m; Roll width: 1mMAT-P-100Roll length: 25/30/50m; Roll width: 1m
7.jpg8.jpg9.jpg
M218Roll length: 25/30/50m; Roll width: 1mM205Roll length: 25/30/50m; Roll width: 1mM207Roll length: 25/30/50m; Roll width: 1m
10.jpg11.jpg12.jpg
M209Roll length: 25/30/50m; Roll width: 1mM211Roll length: 25/30/50m; Roll width: 1mM224Roll length: 25/30/50m; Roll width: 1m


Parameter
Application
Inquire Now
Name: *
Mobile:
E-mail: *
Message: *
Verification code: *
  
Other products
BE THE FIRST TO KNOW !
Please write down your information to facilitate inquiries about our related products
    bottom_logo

    Tianma Group Corp is engaged in research on fiberglass/composite material products and related technologies, and has won multiple national, provincial, and municipal level scientific and technological progress awards. Based on this, the company implements a technological innovation strategy, actively cooperates with domestic and foreign research institutes, targets and tracks international market trends, continuously develops new products with independent intellectual property rights, and enhances core competitiveness.

      Contact Us

      E-mail: sales1@tm253.com

      Tel: 0086-519-68193652

      Add: No. 309 Huanghai Rd, Xinbei District, Changzhou, Jiangsu, China

    CopyRight © 2026 CHANGZHOU TIANMA GROUP CO.,LTD. (FORMER CONSTRUCTION MATERIAL 253RD FACTORY) All rights reserved Sitemap  All tags 
    Obtain the latest product information
    After more than 50 years of development and independent innovation, Tianma Group has always been in a leading position in the fierce market competition. It is China's fiberglass raw material industrial base with large production, excellent quality, multiple varieties, and the widest product coverage
    Company Name
    *
    This field is required
    Email
    *
    This field is required
    Email format error
    Phone
    This field is required
    Telephone information is wrong!
    Message
    *
    This field is required
    Send Message