SMC BMC molded compounds material supplier TIANMA GROUP china

Your location:Home Products SMC/BMC Molded Material SMC/BMC Molded Material

//en.tm253.com/uploadfiles/128.1.164.122/webid2194/source/202304/168240153679.jpg

SMC/BMC Molded Material

The research of SMC began in 1951 and it became more mature after1965 until LP-SMC,LC-SMC,HMC and XMC etc of today,nowadays variousproducts of this kind have already been over several hundred kinds and thisproducts is the mostly widely and massively used technology in the current allFRP products. The major materials used in the SMC is cut chopped strand withthe cut length 25mm or 50mm, resin,densitifying agent,mold release agent,color paste，high temperature solidifying agent which will be squeezed by SMCsheet machine. after impregnation it can be in rolls or to be folded layer bylayer. The vis...

Inquiry Now

Product Detail

Introduction

Performance	Unit	SMC	Fiberglass Reinforced ABS	Steel	Aluminum
Density	g/cm³	1.7~1.9	1.25~1.38	7.8~7.9	2.7~2.8
Fiberglass Content	%	15~60	20~40
Flexural Strength	Mpa	90~360	160~170	250~450	140~240
Flexural Modulus	Gpa	8~20	310	210	60
Tensile Strength	Mpa	50~230	75~110	250~450	100~200
Tensile Modulus	Gpa	10~17	4~6	210	60

Parameter

Remark	Item	Density	Water Absorbing Performance	Mould Plastic Shrinkage Rate	Fiberglass Content	Heat Deformation Temperature	Flexural Strength	Flexural Modulus	Punch Strength	Tensile Strength	Dielectric Strength
General SMC	Standard	GB /T1463	GB /T1462	GB /T15568	GB /T15568	GB /T1634	GB /T1449	GB /T1449	GB /T1451	GB /T1447	GB /T1408
	Unit	g/cm3	mg	%	%	℃	Mpa	Gpa	KJ/m²	Mpa	KV/mm
	1028	1.75-1.85	≤20	≤0.15	21±2	≥200	≥130	≥9	≥45	≥50
	1039	1.75-1.85	≤20	≤0.15	26±2	≥200	≥150	≥10	≥60	≥65
	1040	1.75-1.85	≤20	≤0.10	26±2	≥200	≥150	≥10	≥55	≥60
	1045	1.75-1.85	≤20	≤0.15	19±2	≥200	≥110	≥9	≥40	≥45
	1045DC	1.75-1.85	≤20	≤0.15	21±2	≥200	≥130	≥9	≥45	≥50
	1046	1.75-1.85	≤20	≤0.15	26±2	≥200	≥150	≥10	≥60	≥65
	1046A	1.75-1.85	≤20	≤0.12	32±2	≥200	≥170	≥10	≥65	≥70
	1081	1.75-1.85	≤20	≤0.12	28±2	≥200	≥160	≥10	≥65	≥70
	1081R	1.75-1.85	≤20	≤0.12	30±2	≥200	≥170	≥10	≥75	≥80
	1081TX	1.80-1.90	≤20	≤0.10	36±2	≥200	≥190	≥11	≥85	≥90
	1086	1.80-1.90	≤20	≤0.10	38±2	≥200	≥200	≥11	≥95	≥100
Low Shrinkage SMC	1036	1.75-1.85	≤20	≤0.05	23±2	≥200	≥130	≥8	≥40	≥45
	1037	1.75-1.85	≤20	≤0.05	28±2	≥200	≥170	≥10	≥75	≥85
	1080	1.75-1.85	≤20	≤0.05	30±2	≥200	≥150	≥9	≥70	≥70
	1082	1.75-1.85	≤20	≤0.08	28±2	≥200	≥170	≥10	≥80	≥80
	1083	1.75-1.85	≤20	≤0.08	28±2	≥200	≥170	≥10	≥80	≥80
Flame Retardant SMC	2010	1.75-1.85	≤20	≤0.15	23±2	≥200	≥140	≥9	≥50	≥50	≥12
	2017	1.75-1.85	≤20	≤0.10	28±2	≥200	≥170	≥10	≥70	≥70	≥12
	2039	1.75-1.85	≤20	≤0.15	23±2	≥200	≥140	≥9	≥50	≥50	≥10
	2045	1.75-1.85	≤20	≤0.15	20±2	≥200	≥110	≥9	≥45	≥45	≥10
	2050	1.75-1.85	≤20	≤0.15	24±2	≥200	≥140	≥9	≥50	≥55	≥12
	2070	1.75-1.85	≤20	≤0.15	26±2	≥200	≥150	≥10	≥60	≥65	≥12
	2076	1.75-1.85	≤20	≤0.15	26±2	≥200	≥150	≥10	≥60	≥65	≥10
	2082	1.80-1.90	≤20	≤0.08	36±2	≥200	≥180	≥11	≥85	≥85	≥12
	2082T	1.80-1.90	≤20	≤0.05	33±2	≥200	≥180	≥11	≥90	≥95	≥12
	2088	1.80-1.90	≤20	≤0.08	36±2	≥200	≥180	≥11	≥85	≥85	≥12

Remark	Insulation Resistance	Electric Resistance Arc	Dielectric Coefficient	Electric Loss (TAN)	Electric Leakage Resttance Crease Index	Combustion Resistance	Notes
General SMC	G B/T10064	GB /T1411	GB /T1409	GB /T1409	GB /T4207	UL-94
	Ω	S			V	Grade
							The surface effect is general,suitable for ordinary products
							Good surface effect, general purpose
							Class A surface finish, suitable for bathroom products
							The surface effect is average, suitable for ordinary products
							Good surface effect, suitable for watch box products
							Slightly lower strength, suitable for ordinary products in the automotive industry
							Good surface effect,high strength, good water resistance, suitable for large water tank products
							High strength, suitable for the automotive industry
							High strength, good surface effect, suitable for colored exterior parts such as cars
							High strength, suitable for large products in automotive and other fields
							High strength, general surface effect, suitable for high-strength and high-frequency vibrationparts of construction machinery
Low Shrinkage SMC							Class A surface effect, suitable for bathroom and high surface effect flat panel
							Class A surface effect, high strength, suitable for the automotive industry
							Class A surface effect, high strength, suitable for the automotive industry
							High strength, with certain anti-corrosion properties
							High strength, good corrosion resistance
Flame Retardant SMC	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	General surface effect, general purpose
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	Strength, suitable for bracket products in railway industry
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V1	General flame retardancy, suitable for insulating boards
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V1	General surface effect, general purpose
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	Good surface effect, suitable for watch box products
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	Fortunately, the light transmittance is suitable for medical CT cover
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V1	Good surface effect, suitable for watch box products
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	High strength, suitable for subway seats and other load-bearing products
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	A-arade surface effect, high strenath, suitaple for high-speed rail subway wall panel products.meet the standards of the Ministry of Railwavs, HL2 standards in EN45545. etc.
	≥1.0×10¹³	≥180	≤4.5	≤0.015	≤600	V0	High strength, suitable for railway cable ducts

Application

Welcome to TIANMA, a leading provider of high-quality SMC (Sheet Moulding Compounds) and BMC (Bulk Moulding Compounds) molded materials. At TIANMA, we specialize in delivering top-notch solutions for a wide range of applications, ensuring superior performance and reliability in every project.

SMC Compound: Engineered ExcellenceOur SMC compounds are meticulously formulated to meet the most demanding engineering requirements. These versatile materials, often referred to as "smc compound" or "smc sheet moulding compounds," exhibit exceptional strength, impact resistance, and dimensional stability. TIANMA's SMC compounds find applications in diverse industries, including automotive, aerospace, and electrical, where their unique combination of properties ensures optimal performance and longevity.

SMC Sheet Moulding Compounds: Tailored for SuccessTIANMA takes pride in offering a comprehensive range of "smc sheet moulding compounds" designed to cater to specific manufacturing needs. These compounds are characterized by their excellent flow characteristics, allowing for intricate mold filling and precise replication of details. From automotive body panels to electrical enclosures, our SMC sheet moulding compounds play a crucial role in enhancing product aesthetics, durability, and overall functionality.

SMC Molded Material: Unleashing InnovationExperience innovation like never before with TIANMA's SMC molded materials. Renowned for their adaptability and reliability, our "smc molded material" solutions empower manufacturers to create complex and intricate components with ease. Whether you're developing lightweight structural parts or corrosion-resistant components, TIANMA's SMC molded materials offer a winning combination of performance and cost-effectiveness.

BMC Molded Material: Precision RedefinedIn addition to SMC, TIANMA excels in providing high-quality BMC molded materials. These materials, often known as "bmc molded material," are tailored for applications where intricate shapes and tight tolerances are essential. With excellent electrical insulation properties and flame resistance, our BMC molded materials are the preferred choice for electrical and electronic applications, ensuring safety and reliability.

Choose TIANMA for Your Molding SolutionsTIANMA stands as your reliable partner in delivering cutting-edge SMC/BMC molded materials. Our commitment to quality, innovation, and customer satisfaction sets us apart in the industry. Explore the possibilities with TIANMA and elevate your projects with our exceptional "smc compound," "smc sheet moulding compounds," and "smc molded material" solutions.

Rail transportation